ZyXEL AAM1212-51

ZyXEL AAM1212-51

12-port Annex A ADSL2+ line card (over POTS) with splitters built-in for chassis IES-1000M
PN: 91-004-503001B
skladem
16 510 Kč
19 977 Kč vč. DPH | Běžná cena: 21 975 Kč

Vložit do košíku

Na Vaše přání Vám zakoupené produkty rádi a ochotně nainstalujeme, nakonfigurujeme a samozřejmě Vás zaškolíme v jejich užívání a ovládání. Máte-li zájem o naše servisní služby, kontaktujte naše zákaznické centrum.

Podrobné info

Oblast použití

Funkce

Technické parametry

System Specification

  • Delivery of Ethernet in the first mile using legacy LAN technologies
  • End-to-end provisioning by offering DSL circuit configuration through NetAtlas Access EMS
  • Support expandable configuration with plug-and-play line cards
  • SNMP v1, v2 manageable
  • Web management
  • FTP/TFTP for firmware upload
  • Console port configuration (RS-232)
  • Telnet configuration and monitoring
  • Spanning tree algorithm (802.1D) for loop free connection
  • Configurable MTU value
  • PPPoE intermediate agent compliant with TR-101
  • G.998.1 ATM bonding
  • 802.1Q VLAN aware bridging
    • IGMP snooping supports multicast traffic
    • QoS support with 802.1p
    • DHCP relay agent option 82 per VLAN
    • Port isolation/per VLAN isolution
    • 256 static VLAN entries (full-range VLAN ID 1~4094)
    • 4 K MAC address entries
  • Packet prioritizing per 802.1p (QoS)
    • Static configuration – default priority setting
    • 4 priority queues per PVC (up to 4 PVCs)
  • Multicast
    • IPv4 multicast forwarding (through L2 MAC)
    • Static multicast membership configuration
    • IGMP v1, v2 snooping & IGMP proxy mode support
    • Shared VLAN multicast
    • 256 multicast groups and each group can contain 18 members
    • IGMP filtering profile
    • IGMP count limiting
    • MVLAN
    • DSL port multicast bandwidth control
  • Management support
    • CLI-based management from console/Ethernet port
    • SNMPV1,v2 and telnet through Inband Ethernet interface and NetAtlas Access, PC-based EMS management support
    • Web-based management through Inband Ethernet interface
    • Secured Host: configure remote host IP addresses for management
    • UNIX syslog
    • F/W upgrade, configuration backup & restore via FTP and Web
    • Text-based configuration file support
  • Port configuration
  • Alarm/Status Surveillance
  • Performance monitoring
  • Security and Memory Backup
  • Self diagnostics
  • Remote reset
  • EMS Management support
  • MIB
  • SNMP MIB II (RFC1213)
  • SNMP v1
  • SNMP v2
  • RFC1493 Bridge MIB
  • RFC1643 Ethernet MIB
  • RFC1757 Four group of RMON
  • RFC2674
  • RFC2662 ADSL line MIB
  • RFC4319 (formerly RFC3276) SHDSL Line MIB

Hardware Specifications

  • IES-1000M
    • 19"1U rack mountable, 2 card slots chassis
    • Dimension : 440 mm (W) x 320 mm (D) x 46 mm (H)
    • 2 line cards to accommodate different types of DSL services as well as VoIP services
    • Fully hot-swappable design
    • Support 8 to 32 ports in MDU/central office environment
    • Temperature monitoring and alarm
    • Auto-shutdown for over temperature
    • Surge protection to prevent lightning damage
  • AAM1212-51 line module
    • One Telco 50 connectors for 12-port ADSL/ADSL2/ADSL2+ and splitter card over POTS
    • One mini RJ11 console port for local management
    • Two 10/100Base-TX for uplink
    • DELT(Dual Ended Loop Test)
    • SELT (Single End Loop Test)
    • G.998.1 2-port ATM bonding
    • Power enhancement or ADSL power saving mode
    • Rate adaptation
    • Status LEDs- System Status, Ethernet 1 and 2 Link Status, Ethernet 1 and 2 Active Status, ADSL ports status,Alarm
    • ADSL Compliance
      • DMT T1.413, issue 2
      • G.DMT (ITU G.992.1)
      • G.LITE (ITU G.992.2)
      • G.HS (ITU G.994.1)
      • Auto-negotiating rate adaptation
    • ADSL2
      • G.992.3 Annex A
      • G.992.3 Annex L (RE-ADSL)
      • Annex M
    • ADSL2+
      • G.992.5 Annex A, Annex M
  • AAM1212-53 line module
    • One Telco 50 connectors for 12-port ADSL/ADSL2/ADSL2+ and splitter card over ISDN
    • One mini RJ11 console port for local management
    • Two 10/100Base-TX for uplink
    • DELT(Dual Ended Loop Test)
    • SELT (Single End Loop Tets)
    • Power enhancement or ADSL power saving mode
    • Rate adaptation
    • Status LEDs- System Status, Ethernet 1 and 2 Link Status, Ethernet 1 and 2 Active Status, ADSL ports status,Alarm
    • ADSL Compliance
      • DMT T1.413, issue 2
      • G.DMT (ITU G.992.1)
      • G.LITE (ITU G.992.2)
      • G.HS (ITU G.994.1)
      • Auto-negotiating rate adaptation
      • ADSL2   G.992.3 Annex B
      • ADSL2+  G.992.5 Annex B
  • SAM1008 line module
    • One console port-: Mini-RJ-11(4P4C)
    • One Ethernet port - RJ45 10/100 Mbps
    • 8-port G.SHDSL- RJ-11 connector
    • Status LEDs- System Status, Ethernet Link Status, Ethernet Active Status, G.SHDSL ports status, Alarm
    • Compliant with ITU-T G.991.2
    • TC-PAM modulation
    • Transmission rate: 192k ~ 2.3Mbps, 64kbps increments over single copper pair
    • All front access
    • Hot-swappable
  • SAM1216-22 line module
    • One Telco 50 connectors for 16-port G.SHDSL.bis
    • One mini RJ11 console port for local management
    • Two 10/100Base-TX for uplink
    • In-band Ethernet management
    • Status LEDs- System Status, Ethernet Link Status, Ethernet Active Status, G.SHDSL.bis ports status, Alarm
    • Line coding: TC-PAM
    • Transmit power: up to 16.8 dBm
    • Density: 16 ports per chip
    • SHDSL payload format: ATM
    • Rate Adaptation Mode: fixed, line probing
    • Up to 4096kbps in single pair, m-pairs (2/4 pairs mode) bonding support up to  16.384Mbps
    • Annex A and annex B PSD mask
    • SHDSL line profile
    • SHDSL alarm profile
    • Power backoff
    • Standard Compliant
      • ETSI SDSL (ETSI TS 101 524 V 1.2.1)
      • ITU G.shdsl (ITU-T G.991.2 (2001))
      • ITU G.shdls.bis (ITU-T G.991.2 (2004))
  • VOP1224-61 line module
    • One Telco 50 connectors for 24-FXS ports over POTS
    • One mini RJ11 console port for local management
    • Two 10/100Base-TX for uplink
    • Ringer Max output power : 14 Watt
    • Support SIP singling protocol
    • Support G.711, G.726, G.729 a/b, G.723.1
    • Support T.38 Fax/Modem signal coding & Fax Relay (G.711 a/m)
    • Echo cancellation based on ITU-T G.168 , G.165
    • Silence detection/suppression and Comfort Noise Generation (CNG)
    • Voice Activity Detection (VAD)
    • Caller ID detection (for VoIP packets from uplink)
    • 10 K Business Hour Call Attempts (BHCA)
    • Configurable jitter buffer
    • Support the generation of dial tone, second dial tone, ringing tone (ring-back tone), busy tone, off-hook warning tone
    • Support call waiting, call hold, call transfer, return and call back on busy
    • MLT (Metallic loop testing for subscriber lines) and GR-909 loop diagnostic

Physical Specification

  • IES-1000M
    • Dimension: 440 (W) x 320 (D) x 46 (H)mm
    • Weight : 3.7Kg
  • AAM1212-51
    • Dimension: 170 (W) x 320 (D) x 35 (H)mm
    • Weight : 0.9Kg
  • AAM1212-53
    • Dimension: 170 (W) x 320 (D) x 35 (H)mm
    • Weight : 0.9Kg
  • SAM1008
    • Dimension: 170 (W) x 320 (D) x 35 (H)mm
    • Weight : 0.9Kg
  • SAM1216-22
    • Dimension: 170 (W) x 320 (D) x 35 (H)mm
    • Weight : 0.9Kg
  • VOP1224-61
    • Dimension: 170 (W) x 320 (D) x 35 (H)
    • Weight : 0.8Kg

Enviromental specification

  • Power supply (AC/DC)
    • AC Power: 100~240V AC, 50 ~ 60Hz
    • DC Power:  -36 ~ -72 V DC
  • Power consumption
    • AAM1212-51: 25W
    • AAM1212-53: 25W
    • SAM1008: 8.59W
    • SAM1216-22: 25W
    • VOP1224-61 : 30W
  • Operating Temperature:0°C~ 50°C
  • Storage temperature:-40°C~ 70°C
  • Operating Humidity:10% ~ 90% (non-condensing)
  • Storage Humidity:10% ~ 95% (non-condensing)

Certification

  • Safety
    • UL 60950-1
    • CSA 60950-1
    • EN60950-1
    • IEC 60950-1
  • EMC
    • FCC Part 15B Class A
    • EN55022 Class A
    • EN55024 Class A
    • ETSI 300386
  • Reliability
    • ETSI 300019
    • Telecom
    • ITU-T K20